Real Good Toys Victorian Painted Lady Instructions Manual page 24

Instructions for kit #JM-4600
Lining things up: You are puting together many parts and lining them up with each other and with parts that are already
in place... it's easy to get lost!! Start by having the parts touching and with everything lined up on the inside with the walls.
After the tape is tight, pinch the parts to line up on the inside again, then make the outside work too (like 44B).
□
43. Glue 1 / x 2 5 /
8 16
floor Bays, touching the Bay Verticals on the ends. As you are putting
glue on the Window Block, put a dab on each end too so the Block will
be glued to the Bay Vertical Sides and to the Bay Vertical Corners. Glue
1 / x 3 5 / " Window Blocks to the Bay Fronts, centered side-to-side.
8 16
□
44. Glue Bay Vertical Corners to the Bay Walls and Window
Blocks. Stretch tape around the bay to the walls behind so the Corners
will be tight in the Bays (Illustration #44A).
Adjust the Corners to line up with the corners of the Bay Walls. Pinch
the Window Blocks straight and lined up with the Bay Verticals on the
inside, then re-adjust the Corners' side-to-side fit (Illustration #44B).
Illus. #44B
Lined up in the corner
" Window Blocks to the Bay Sides of the first
Illus. #44A
Bay Vertical Corners
Windows: Bay Verticals (4) page 24
Illus. #43
1 / x 2 5 / " Window Blocks
8 16
/ x 3 / " Window Blocks
1 5
8 16