Real Good Toys Victorian Painted Lady Instructions Manual page 30

Instructions for kit #JM-4600
*If your Left Nosing doesn't seem to fit,
you may have missed step #54
Attic Tabling Trim
Left-bottom Nosing*
Nosing
Cornice
Crosspiece,
Tabling Trim
Pilaster
Left-top Nosing*
4 3 / Pilaster
4
1 3 / Pilaster
4
Balcony Cornice
Porch Cornice
□
57. Trim: Lay the house on its back. Lay out the trim as shown, but without glue.
The parts lay out from the bottom - up, but you will glue them on in reverse order: from the
top - down. If your outside trim plan uses the Stripwood Trim (step #58), glue the molding
trim on after you have cut and fit the Stripwood (step #60).
Notes:
A. The Porch Cornice lines up with the Balcony Floor on top
B. The Balcony Cornice lines up with the Balcony Ceiling on the bottom (If you shingled
where the right end goes, some of the shingles may have to be carved or removed)
C. Space the center-two 1
outer two spaced 1 1 /
2
as the spacers).
D. Center the Attic Tabling Trim on the Pilasters
E. Center the 4 3 / " Pilasters over the spaces between the 1
4
F. Space the 1 1 / " Gable Pilasters 1
8
G. The Right Roof Nosing has clearance at the bottom for shingling*.
H. The Balcony Cornice touches the Tower and has clearance for shingling* on the
right
Erase the Reference line after gluing all the trim in place
Right Roof Nosing
Attic Crosspiece
Clearance
1
3 / " Pilasters 3 / " from the Reference line (step #35) and the
4 4
" farther out (you can use the
1 / " apart
4
Moldings and Trim (7) page 30
Gable Nosing
1 / Pilaster
8
3 / " width of the Gable's
4
3 / " Pilasters
4
*Consider shingling (Step #66)
before attaching the Balcony
Cornice and Right Roof Nosing
Gable Crosspiece
Gable Base Nosing
" Pilasters
1 1 /
8