Settings; Measurement Settings; Settings For D.o. Sensors (Menu Or Measurement And Calibration Settings) - wtw Oxi 3315 Operating Manual

Oxi 3315

Settings

ba75944e02 03/2012
6 Settings
6.1 D.O. measurement settings
6.1.1 Settings for D.O. sensors
(menu or measurement and calibration settings)
The settings are available in the menu for measurement and calibration set-
tings. To open the settings, display the required measured parameter in the
measured value display and press the <ENTER> key. After completing the set-
tings, switch to the measured value display with <M>.
Default settings are printed in bold.
Menu item
Calibration /Cali-
bration record
Calibration / Cal-
ibration data
storage / Display
Calibration /
Calibration data
storage /
Output to
RS232/USB
Calibration /Cali-
bration interval
Calibration /
Comparison
meas.
FDO Check /
Start FDO Check
FDO Check /
Check interval
Sal correction
Salinity
Possible Description
setting
Displays the calibration record of the
-
last calibration.
Displays the last calibration records
-
(max. 10)
Outputs the calibration data storage to
-
the interface
Calibration interval for the D.O. sensor
1 ... 180 ...
(in days).
999 d
The meter reminds you to calibrate reg-
ularly by the flashing sensor symbol in
the measuring window.
Enables to adjust the measured value
on
with the aid of a comparison measure-
off
ment, e.g. Winkler titration.
For details, see section 5.3 C
, page 28.
TION
Starts the FDO
-
Interval for the FDO Check (in days).
1 ... 60 ...
The meter reminds you to check the
999 d
sensor regularly by FDO Check status
indicator in the measuring screen.
Manual salt content correction for con-
on
centration measurements.
off
0.0 ... 70.0 Salinity or salinity equivalent for the salt
content correction.
This menu item is only available if the
manual salinity correction function is
switched on (Sal correction).
Settings
-
ALIBRA
®
check procedure
33