Resetting To Default Settings; Disposal - wtw Oxi 1970i Operating Manual

Oxi 1970i
Measurement
parameters
Configuration
parameters
pH S mV
I i n i
O %
mg/l
S/
m
Sal
1/
cm
Time Baud 0 9 n o
C
°
Day.Month No.
%
Year Ident
ba75676e03 05/2012

Resetting to default settings

You can reset the measurement parameters and the configuration to the
delivery status separately from one another (initialization).
The following measurement parameters can be reset to the delivery status:
Oxygen (O InI)
2
Measuring mode
AutoRange automatic switchover of
the measurement range
Relative slope
Correction factor of the relative
slope
Salinity input
Salinity correction
The following configuration parameters (InI) can be reset to the delivery
status:
Baud rate
Interval 1
(automatically saved)
Interval 2
(for data transmission, Oxi 340i
only)
Reset procedure:
 Press <CAL> while pressing the <RUN/ENTER> key.
/ pH
 To reset the measurement parameters, use <▲> <▼> to select YES and
cm
confirm with <RUN/ENTER>, or
Sal
/ K  Continue to the configuration parameters without resetting (InI) with the
TP
<RUN/ENTER> key.
 After the InI configuration parameters, the instrument switches to the last
active measurement mode.

Disposal

At the end of its operational lifetime, the meter must be returned to the
disposal or return system statutory in your country. If you have any questions,
please contact your supplier.
Resetting to default settings
D. O. concentration
On (YES)
1.00
1.000
0.0
Off
4800
OFF
OFF
27