Measurement Data Storage; Editing The Measurement Data Storage - wtw Oxi 3315 Operating Manual

Oxi 3315
Editing the data stor-
age
Settings
ba75944e02 03/2012
7.3

Measurement data storage

7.3.1 Editing the measurement data storage

The contents of the manual or automatic measurement data storage can be
shown on the display.
Each of the measurement data storages has a function to erase the entire
contents.
The storage is edited in the menu, Storage & config / Data storage. To open
the Storage & config menu, press the <ENTER_> key in the measured value
display.
Open the manual or automatic data storage directly with the <RCL> or <RCL_>
key.
The settings are explained here using the manual storage as an
example. The same settings and functions are available for the
automatic storage.
Menu item
Data storage /
Manual data storage
/ Display
Data storage /
Manual data storage
/ Output to RS232/
USB
Data storage /
Manual data storage
/ Erase
Setting/ Description
function
- Displays all measurement datas-
ets page by page.
Further options:
 Scroll through the datasets with
<><>.
 Output the displayed dataset to
the interface with <F2>/[USB
output].
 Quit the display with <F1>/
[Zurück].
- Outputs all stored measurement
data to the interface.
- Erases the entire manual mea-
surement data storage.
Note:
All calibration data remains stored
when this action is performed.
Data storage
41