Set-Up Place - CARDIOSTRONG BALTIC Assembly And Operating Instructions Manual

For more information, please visit cardiostrong.com, sport-tiedje.com
Table of Contents

Advertisement

1.3

Set-up place

+
The equipment should only be used indoors, in a sufficiently heated and dry area
(ambient temperature between 10°C and 35°C). The equipment should not be
used outdoors or in rooms with high humidity (over 70%) like swimming pools. The
equipment should only be stored in surroundings with an ambient temperature
between 5°C and 45°C.
+
The training room should be well ventilated during training and not be exposed to
any draughts.
+
Choose a location in which to place the equipment such that there is enough free
space/clearance to the front, the rear and to the sides of the equipment (at least
1.50 m). Furthermore, the equipment should not be set up in main entrances or on
escape routes.
+
Always keep the power cable away from hot surfaces and grounds and make sure
that the cable is not stuck somewhere or becomes a „trip hazard".
+
No objects of any type should be inserted into the openings of the equipment.
+
The equipment should be placed on a level and solid surface, any unevenness in
the floor should be leveled out.
+
A floor protective mat / equipment underlay can help to protect high-quality floor
coverings (parquet, laminate, cork, carpets) from dents and sweat and can help to
level out slight unevenness.
+
Please choose your place of set-up so that you have sufficient space for exercising
in all directions. Make sure that there is a training zone of at least 30 cm on every
side and at least 15 cm in front and behind the rowing machine. It is the minimum
required space for a safe use of the equipment. The recommended free zone
surrounding the equipment should be at least 60 cm to every side and 45 cm in
front and behind the rowing
machine.
Please also make sure that the
rowing machine is not set up
in main entrances or on escape
routes.
8
Training zone
Recommended free zone
BALTIC

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BALTIC and is the answer not in the manual?

Questions and answers

Table of Contents