Faults And Troubleshooting - CARDIOSTRONG BALTIC Assembly And Operating Instructions Manual

+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The use of
solvents should be strictly avoided. Also, make sure that no liquids (e. g. sweat) get into
the openings of the equipment (e. g. console).
Note of manufacturer: The pull strap is equipped with a return spring – thus the pull
+
strap is winded up automatically. The return spring is equipped with the smallest
possible power. The reason for the light return spring is to offer the user the biggest
training effect for the rear thigh muscles. These muscles are demanded, when the user
moves the seat forwards. If the return power would be strong, the user would be pulled.
2.2

Faults and Troubleshooting

PROBLEM
Heart rate is not received
SOLUTION
1. The chest strap cannot measure a heart rate when your skin is too dry. In order to improve
the transmission, please moisten the contacts of the chest strap.
We recommend to put some chest strap contact gel on it for longer training sessions.
2. Make sure that you wear a compatible chest strap with a 5 kHz frequency.
3. Replace the batteries, even if the chest strap is new.
4. Regarding 5 kHz chest straps, the interference of other electrical devices might be a
problem. Place your rowing machine where no other electrical devices are close to it.
5. Check the functionality of the chest strap by testing it with another equipment at your
contract partner or at a gym.
6. Contact your contract partner to check the compatibility of your chest strap. When you
have still not found a solution, contact your contract partner.
PROBLEM
LCD error – software error etc.
SOLUTION
1. Hold Reset to start the console again.
2. Start the console again by disconnecting the power cable for about 15 seconds.
3. Disconnect and connect again all cable connections, see assembly instructions.
4) Contact a service technician of your contract partner.
10
BALTIC