Operation Instructions / Adjustments - CARDIOSTRONG BALTIC Assembly And Operating Instructions Manual

3.3 Adjusting / setting the rowing machine
Fill and empty the tank
1) Remove the fill plug (24) from the upper tank (17).
2) See figure A – Filling with water. Place the funnel (108) in the tank. Fill the tank with a cup
of water or a syphon pump (107) and a bucket. Please pay attention to the water level
indicator on the side of the tank to fill the water in the tank at the desired level.
3) See figure B – Emptying the tank. Place the bucket beside the rowing machine. Pump the
water with the syphon pump (107) out of the tank into the bucket.
4) Once the tank is completely empty, put the fill plug (24) back in the upper tank (17). Wipe
any remaining water from the frame after having filled/emptied the tank.
NOTE:
1) Fill the tank exclusively with mains water. Do not use any well water. If mains water is not
available, please use pure water and add a water cleaning tablet. NEVER use pool chlore
or chlorine bleach. See maintenance for further tips for water tre atment.
2) The water in the tank cannot be intaken by human beings or animals. Dispose of the
water after emptying the tank.
Water level
See detailed illustration A. The water level indicator is on the side of the tank. The maximum
level for filling is 10. Do NOT fill the tank above the maximum level - it might void the
warranty. The standard level is 9. The resistance is given by the water capacity in the tank.
Example: Level 3 for a light resistance, level 9 for the highest resistance.
A.
108
107
16
107
BALTIC
B.