Changing Fixed Display Lcd Touchpad Chime And Trouble Beep Tones - GE Interlogix Concord Express Installation Instructions Manual

Testing the System
Table 7. System Alarm Sounds
Alarm Type
Fire Repeating series of three beeps
Police/Intrusion Continuous tone
Auxiliary Rapid beeps
Changing Fixed Display LCD Touchpad
Chime and Trouble Beep Tones
The frequency (pitch) of chime and trouble beep tones from
a fixed display touchpad can be adjusted to a more desirable
or distinct tone, and to compensate for hearing impaired
persons.
œÌi
For the comfort of users, chime and trouble beep
tones revert to the quieter, default frequency while the
keypad is in use (during or within 15 seconds of any
button activity at that specific touchpad).
To change status tone pitch:
Press and hold the ‚ and 0 buttons together until you
1.
hear a steady tone, then release the buttons.
Press and hold 1 to lower the pitch or press and hold
2.
2 to raise the pitch.
3. Release the button when the desired pitch is heard.
After about 15 seconds of no touchpad activity, the steady
tone stops sounding.
38
Alarm Sound