GE Interlogix Concord Express Installation Instructions Manual page 24

Concord express security panel
Hide thumbs Also See for Concord Express:
Table of Contents

Advertisement

Cancel Message
(02007)
(Default = on) This setting determines whether or not the
panel displays a cancel message after the user disarms the
system to clear an alarm condition.
To turn Cancel Message off or on:
With the display showing CANCEL MESSAGE OFF/
ON (current setting), press
The display flashes the entered setting. Press
the display shows the new setting.
Pager Delay
(02008)
(Default = 15 seconds) This setting determines how long a
report is delayed to a pager (00 - 30 seconds) after the panel
dials the pager number.
œÌi
The Pager Delay time should not be set below 5
seconds unless absolutely necessary.
To set the Pager Delay time:
With the display showing PAGER DELAY nn (current
setting), enter a two-digit time (00 - 30).
The display flashes the entered setting. Press
the display shows the new setting.
Call Wait Cancel
(02009)
(Default = none) This feature lets you set up a dialing prefix
to disable the call waiting feature before the panel makes its
first dialing attempt to any programmed central monitoring
station, pager, or downloader phone number. The prefix can
be up to eight digits. For prefixes that require dialing * or #,
press and hold for two seconds
To set up Call Wait Cancel:
With the display showing CALL WAIT CANCEL __ (or
current setting), enter the desired prefix.
The display flashes the entered setting. Press
the display shows the new setting.
The following describes how to program the phone option
settings that appear under PARTITION 1.
Remote Access
(Phone Options—Partition 1)
(0210)
(Default = on) This setting determines whether or not the
panel can be accessed from off-site for downloader
programming.
To turn Remote Access off or on:
With the display showing REMOTE ACCESS OFF/
ON (current setting), press
The display flashes the entered setting. Press
the display shows the new setting.
(Phone Options—Global)
1 (off) or 2 (on).
ƒ and
(Phone Options—Global)
ƒ and
(Phone Options—Global)
7 (for *) or 9 (for #).
ƒ and
1 (off) or 2 (on).
ƒ and
Ring/Hang/Ring
(Phone Options—Partition 1)
(0211)
(Default = on) This setting determines how the panel picks
up (seizes) the phone line for downloader programming by
remote access.
œÌi
The REMOTE ACCESS setting (above) must be
turned on for this feature to work.
When this feature is on, the caller must listen for one or two
full rings, hang up, then call the premises again within the
next 10-40 seconds. The system then answers after the first
ring. The "on" setting is recommended if an answering
machine shares the phone line with the panel.
When Ring/Hang/Ring is turned off, the caller must listen
for 12 full rings before the system answers. The "off"
setting is recommended if there is no answering machine
sharing the phone line with the panel.
To turn Ring/Hang/Ring access off or on:
With the display showing RING/HANG/RING OFF/
ON (current setting), press
The display begins flashing the entered selection.
ƒ and the display shows the new setting.
Press
Timers Menu
The TIMERS menu lets you set up the various system fea-
ture times that affect the whole system (global) or a specific
partition.
The following describes how to program the timer settings
that appear under GLOBAL.
Supervisory Time
(0300)
(Default is random) This setting determines what time of
day the panel sends supervisory, low battery, or auto phone
test reports to the central station. The setting is based on a
24-hour timer so there is no need to enter
settings. These will appear automatically on the display.
œÌi
The panel clock must be set with the correct time
for accurate supervisory time reporting. Refer to
the "User Programming" section for setting the
panel clock.
To set the Supervisory Time:
With the display showing SUPERVISORY TIME
HH:MM (current setting), enter the desired 4-digit
time value (for example, enter 1330 to set the
supervisory time for 1:30 p.m.). The display flashes
the entered setting. Press
new setting.
Programming the Panel
1 (off) or 2 (on).
(Timers—Global)
.
. and
.
.
A
M
P
M
ƒ and the display shows the
21

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Concord Express and is the answer not in the manual?

Questions and answers

Table of Contents