GE Interlogix Concord Express Installation Instructions Manual page 37

Programming the Panel
User Codes Menu
The USER CODES menu lets you program/change regular
user access codes and the system master code.
“«œÀÌ>˜ÌÊt
Each security access code (Installer, Dealer, System
Master, or User) must be unique. Do not use the same
combination of numbers for any two codes.
User Codes
(10nn0—nn = user 00 thru 15)
3. (Default = none) User Codes perform basic arming and
disarming functions. The system allows up to 16 user
codes (user numbers 00 - 15). User numbers that show
**** indicate no code is currently programmed for that
user number.
4. To program Regular User Codes:
5. With the display showing USER CODES, press
the display shows REGULAR USER CODES.
ƒ and
6. Press the display shows USER nn (first avail-
able user number).
A or B to select the desired user number, then
7. Press
ƒ . The display shows USER nn - nnnn.
press
8. Enter a 4-digit user code. The display flashes the
ƒ and the display shows USER nn
entered code. Press
- nnnn (new code).
9. To delete Regular User Codes:
10. With the display showing USER CODES, press
the display shows REGULAR USER CODES.
and
ƒ
11. Press the display shows USER nn (first avail-
able user number).
A or B to select the desired user number/user
12. Press
code you want to delete, then press
shows USER nn - nnnn.
13. Enter a 4-digit code that is the same as the system mas-
ter code. The display flashes the entered code. Press
and the display shows USER nn - **** (no code).
Direct Bypassing
(10nn1—nn = user 00 thru 15)
(Default = off) This setting determines whether or not a
user code can bypass sensors.
To turn user code Direct Bypassing off or on:
1. With the display showing USER CODES, press
the display shows REGULAR USER CODES.
ƒ and
2. Press the display shows USER nn (first avail-
able user number).
A or B to select the desired user number, then
3. Press
ƒ . The display shows USER nn - nnnn.
press
B and the display shows DIRECT BYPASSING
4. Press
OFF/ON (current setting).
1 (off) or 2 (on). The display flashes the
5. Press
ƒ and the display shows the new
entered setting. Press
setting.
34
System Tests
(10nn2—nn = user 00 thru 15)
(Default = off) This setting determines whether or not a
user code can perform phone and sensor tests.
To turn user code System Tests off or on:
1.
2.
(User Codes)
3.
4.
5.
System Master Code
ƒ and
(110)
(Default = 1234) The System Master Code performs all
system operations and user programming.
To change the System Master Code:
1.
2.
ƒ and
3.
ƒ . The display Options Menu
The OPTIONS menu lets you set up the system for down-
ƒ
loading and silent arming, and lets you adjust alphanumeric
touchpad display brightness.
(User Codes)
Downloading
(20)
(Default = on) This setting determines whether or not the
panel can communicate with ToolBox software for
programming the system from off-site.
ƒ and
To turn Downloading off or on:
1.
2.
3.
4.
With the display showing USER CODES, press
the display shows REGULAR USER CODES.
ƒ and
Press the display shows USER nn (first avail-
able user number).
A or B to select the desired user number, then
Press
ƒ . The display shows USER nn - nnnn.
press
B until the display shows SYSTEM TESTS OFF/
Press
ON (current setting).
1 (off) or 2 (on). The display flashes the
Press
ƒ and the display shows the new
entered setting. Press
setting.
With the display showing USER CODES, press
B . The display shows SYSTEM MASTER CODE.
ƒ and
Press the display shows SYSTEM MASTER
nnnn (current code).
Enter a new 4-digit code. The display flashes the
ƒ and the display shows the new
entered code. Press
code.
œÌi
The panel must have a Downloader phone number
and Downloader code programmed and be con-
nected to a phone line for this feature to work.
Enter user programming with the system master code.
The display shows TIME AND DATE.
A or B until the display shows OPTIONS.
Press
ƒ and the display shows DOWNLOADING
Press
OFF/ON (current setting).
1 (off) or 2 (on). The display flashes the
Press
ƒ and the display shows the
entered selection. Press
new setting.
(User Codes)
ƒ and
(User Codes)
ƒ then
(Options)