Main Features - Infineon iMOTION EVAL-M1-05-65D User Manual

EVAL-M1-05-65D User Manual
iMOTION™ Modular Application Design Kit

Main features

3 Main features
EVAL-M1-05-65D is a complete evaluation board including a 3-phase IPM for motor drive application. The kit
demonstrates Infineon's IPM technology for motor drives.
Main features of CIPOS™ Micro Intelligent Power Module IRSM515-065 and IRSM505-065 are:
3-phase inverter including high voltage gate drivers
•
Integrated bootstrap functionality
•
Trench FREDFET with R
•
Under voltage lockout for all channels
•
Matched propagation delay for all channels
•
Temperature feedback via NTC applicable for IRSM505-065
•
Optimized dV/dt for loss and EMI trade off
•
3.3 V logic compatible and advanced input filter
•
Possibility to choose single shunt or leg shunt current sensing
•
Driver tolerant to negative transient voltage
•
Isolation 1900 V , 1min
•
rms
Certified by UL file number E252584
•
The evaluation board characteristics are:
Nominal input voltage 240 V
•
20 – 150 W motor power range without heatsink
•
On board EMI filter
•
Current sensing for each phase configured by default
•
Over current protection
•
Sensing of DC-link voltage
•
Thermistor output
•
Fault diagnostic output
•
Measurement test-points compatible to standard oscilloscope probes
•
PCB is 90 x 75 mm and has two layers with 35 µm copper each
•
RoHS compliant
•
User Manual
of 1.3 Ω @ 25°C
DS(on)
AC
5 Revision 2.1
2018-07-09