NEC Express5800 Series User Manual page 166

Chapter 3 Setup
3. iLO 5
Important
If you do not change and use default password in devices controlled via
network, risk of unauthorized access by a malicious third party will increase.
If your device is taken over by unauthorized access, not only data breach but
also such losses as system damage due to retardation of availability or
integrity, or an improper use as the means of cyber attack by botnets will
become possible.
The initial password of this product is simply provided for the initial
configuration for maintenance and operation. Change password without fail
at the time of initial setup. If you use the initial password unchanged and
then you suffer unauthorized access, we will not hold any responsibility at
all.
Even if you change the initial password, less strong ones (ones including
fewer figures) or easily conceivable ones ("123456789," "abrade,"
"Administrator," etc.) are difficult to prevent unauthorized accesses. Please
change to a stronger password (ones with more than 8 figures containing
capital letters, small letters and numbers are recommended).
"How to change password"
1. Log in iLO 5 and then go to Administration - User Administration page.
2. Select "Administrator User" and click Edit.
3. Put the check in "Change password" and enter a new password in New
Password and Confirm Password.
4. Click Update User to update.
166
Express5800/R120h-1E User's Guide