Status Indicators; Leds On The Front Side Of The Unit - NEC Express5800 Series User Manual

Chapter 1 General Description
4.8

Status Indicators

4.8.1

LEDs on the front side of the unit

・2.5-inch drive model
No.
1 UID switch/LED
2 Power switch and system
power LED
3 Status LED
4 LINK/ACT LED
*1 If all the four LEDs described in this table is flashing at the same time, it indicates that a power failure has
occurred. For details, refer to (2) Power failure LED.
36
Item
*1
Lights in blue
Flashes in blue (once per
second)
Flashes in blue (4 times
per second)
Flashes in blue (8 times
per second)
Lights off
Lights in green
*1
Flashes in green (once per
second)
Lights in amber
Lights off
*1
Lights in green
Flashes in green (once per
second)
Flashes in amber
Flashes in red (once per
second)
*1
Lights in green
Flashes in green (once per
second)
Lights off
Express5800/R120h-1E User's Guide
Status
Working in operation
Remote
upgrade is in progress
The iLO restart sequence using the UID
switch has been launched
The iLO restart sequence using UID
switch is in progress
Not working
The system is powered on
The power on sequence in progress
The system is in standby state
Power is not supplied
Normal state
Restarting iLO
The function
deteriorating
The system is in a critical state
Linked to the network
The network is working
The network is not working
4. Names and Functions of Parts
Description
management or firmware
*2
of the system
*3
is