NEC Express5800 Series User Manual page 151

Chapter 3 Setup
In case the setting has been changed, the following screen is displayed. To put the changed parameters
back to the original setting, select No - Discard Changes.
□ <F1> key
Press this key to display help information. Press this key when you have any questions about the operation
of System Utility. Press <Esc> key to go back to the original screen.
□ <F7> key
The following screen is displayed. To put the parameters of System Utility back to the default setting, select
Restore Defaults and Reboot. This operates in the same manner as Restore Default System Settings in
the System Default Options menu. For details, refer to Chapter 2 (1. System Utilities) in the Maintenance
Guide.
□ <F10> key
The following screen is displayed. To save parameters you set, select Yes.
Note
iSCSI Configuration menu in Network Options menu cannot be put back to the
default setting.
Express5800/R120h-1E User's Guide
2. Description on System Utility
151