Identifying Servers (Uid Switch) - NEC Express5800 Series User Manual

Chapter 2 Preparations
1. Installing Internal Optional Devices
1.3

Identifying Servers (UID Switch)

Using UID (Unit ID) Switch helps you to identify the target server.
When the server is working, be sure to identify the target server by using UID Switch first before you turn
off the server or disconnect a cable from the server.
To turn UID LED on, press UID Switch. When it is pressed again, the LED will be off .
・2.5-inch x8 drive model
UID switch / UID LED
・3.5-inch x4 drive model
UID switch / UID LED
49
Express5800/R120h-1E User's Guide