NEC Express5800 Series User Manual page 157

Chapter 3 Setup
Category Description
UPS When the server is
Powerlink supplied with power
from UPS, always turn
on the power.
If it is turned off by
using POWER switch,
leave it OFF even
when UPS supplies
power.
Keep the power OFF
even when UPS
supplies power.
*1 The factory setting is that "the Boot Mode menu" is set as "UEFI" and "the X2APCI menu" is set as "Enabled".
To be changed
Set to Always Power On in System
Configuration > BIOS/Platform
Configuration (RBSU) > System Options >
Server Availability - Automatic Power-On
Set to Restore Last Power Stats in System
Configuration > BIOS/Platform
Configuration (RBSU) > System Options >
Server Availability - Automatic Power-On
Set to Always Power Off in System
Configuration > BIOS/Platform
Configuration (RBSU) > System Options >
Server Availability - Automatic Power-On
Express5800/R120h-1E User's Guide
2. Description on System Utility
(5/5)
Remark
If you connect UPS via
RS232C, make console
redirection setting invalid
from System Utility (set to
Disabled in BIOS Serial
Console Port).
157