Removal - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
6.
Press the arrow of below figure then lock the latch to fix the LOM card.
7.
Fix the LOM card with two screws.
8.
See Chapter 2 (1.9 Riser Card) to install the 1st Riser Card.
9.
See Chapter 2 (1.5 Top Cover) to attach the top cover of the server.
10.
Please see Chapter 2 (2. Installation and Connection) in this manual to conduct installation and
connection, and turn the power supply ON.
1.13.2
Removal
The procedure for removal is the reverse of installation.
Re-attach the blank cover if you operate without it attached.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important
To maintain the cooling effect in the server, install the blank cover in the
vacant LOM Card slot.
Express5800/R120h-1E User's Guide
1. Installing Internal Optional Devices
101
Advertisement
Table of Contents
