Back View Of The System - Dell EMC PowerEdge R840 Installation And Service Manual

Option Description
Select Simple to view LCD error messages in a simplified user-friendly description. For more information about
error messages, see the Dell Event and Error Messages Reference Guide at Dell.com/openmanagemanuals >
OpenManage software.
Set home Select the default information to be displayed on the Home screen. See View menu section for the options and
option items that can be set as the default on the Home screen.
View menu
NOTE: When you select an option in the View menu, you must confirm the option before proceeding to the next action.
Option Description
iDRAC IP Displays the IPv4 or IPv6 addresses for iDRAC9. Addresses include DNS (Primary and Secondary), Gateway, IP,
and Subnet (IPv6 does not have Subnet).
MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Name Displays the name of the Host, Model, or User String for the system.
Number Displays the Asset tag or the Service tag for the system.
Power Displays the power output of the system in BTU/hr or Watts. The display format can be configured in the Set
home submenu of the Setup menu.
Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can be configured in the Set
home submenu of the Setup menu.

Back view of the system

The back view displays the features available on the back of the system.
Figure 6. Back view of the 24 x 2.5-inch drive system
1 Full-height PCIe expansion card slots (Slot 1 and 2)
3 Full-height PCIe expansion card slots (Slot 5 and 6)
5 System identification button
7 USB 3.0 ports (2)
9 Serial port
11 Rear handle
2 Half-height PCIe expansion card slots (Slot 3 and 4)
4 Power supply units (2)
6 iDRAC9 dedicated port
8 VGA port
10 NIC ports (4)
PowerEdge R840 system overview 13