Table of Contents
Advertisement
2
VIEWING VIDEO FROM A CAMERA
Viewing on multi 6 screens
1
Press the [MULTI] button.
The MULTI indicator lights up and the monitor display is
divided in six.
MULTI
In the case of both quad and multi 6 screen display, you
can change the positions in which video from the
various cameras are displayed. ( P.89)
Viewing with automatic screen
selection
Setting automatic full screen selection
Use the following procedure when viewing a full screen to
have the displayed video change automatically based on
camera numbers.
1
Press the [SEQUENCE] button.
The SEQUENCE indicator starts to flash and the displayed
video changes automatically based on camera numbers.
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
01
04-01-01 00:00:00 REC REPEATENA ALARM 0000
02
01-01-01 00:00:00 REC REPEATENA ALARM 0000
02-01-01 00:00:00 REC REPEATENA ALARM 0000
It is possible to specify the cameras for which automatic
selection is to be carried out. ( P.91)
Canceling automatic selection
2
Either press the [SEQUENCE] button
once again or press the appropriate
[CAMERA SELECT], [QUAD], or [MULTI]
button.
Automatic selection ends and the display returns to the
normal screen.
02
01
03
04
05
06
03
04
Setting automatic quad-screen selection
1
Press the [QUAD] button.
The QUAD indicator lights up and the monitor display is
divided in four.
QUAD
2
Press the [SEQUENCE] button.
The content of the split screen will automatically toggle
between video from cameras No. 1 through No. 4 and
video from cameras No. 5, No. 6, No. 1, and No. 2.
Returning to normal quad-screen display
3
Press the [SEQUENCE] button once
again.
Automatic selection ends and normal quad-screen display
returns.
Automatic selection cannot be used with playback
video.
18
01
02
03
04
01
02
05
06
03
04
01
02
English
Advertisement
Table of Contents
