Fisher & Paykel WH1260F1 Installation Manual page 8

Detach the drain hose
3
from the plastic clasp, and
remove the clasps on the
side of the transit braces.
Remove the 10 transit brace
4
screws from the left and
right sides, and near the
centre of the top brace
(refer to C).
Remove the braces (refer
5
to D). Keep the braces and
screws for future use.
Pull out the two transit rods
6
located below the two lower
transit bolt holes and retain for
future use (refer to E).
Remove the yellow safety clip
7
from the power cord.
Cover the transit bolt holes with
8
the plastic plugs (provided).
Push to clip into place (refer to F).
6
INSTALLATION INSTRUCTIONS
Removing the drain hose
C
Removing the transit brace screws
Removing the transit rods
D
Covering bolt holes with plastic plugs
Removing the braces
E
F