Fisher & Paykel WH1260F1 Installation Manual page 18

Front loading clothes washer
Hide thumbs Also See for WH1260F1:
Table of Contents

Advertisement

Add a Garment
The 'Add a Garment' option enables you to add or remove items during the wash stage
of the cycle, under certain conditions.
Once the 'Add a Garment' button is touched, the
time on the display screen. Wait until you hear the door unlock.
Open the door and add or remove items. Close the door and touch
The 'Add a Garment' button will only operate during the wash part of the cycle and
when the temperature selected is lower than 60°C. 'Add a Garment' can still be used if
the water level is above the bottom of the door, as your washer will drain the water to
a lower level so the door can be opened.
Keylock
This option enables you to deactivate the buttons on the display panel, except
for the 'POWER' and 'Keylock' buttons. This prevents accidental button presses.
The display panel will notify you when 'Keylock' is ON or OFF.
To turn Keylock mode ON or OFF when the washer is powered on:
Touch and hold
will show on the display screen, and
active.
If Keylock mode is activated and the washer is powered off:
To turn your washer on, press 'POWER' button, then touch and hold the
for 3 seconds to deactivate 'Keylock'. Select your wash cycle, options and then touch
to start the cycle.
Drum light
Your washer has a drum light to assist you with loading and unloading your washing.
For your convenience, this LED light will automatically turn on for a short time when you
press 'POWER', and at the end of a cycle while you unload all of your items from the
washer.
16
CONTROL PANEL
button for 3 seconds. You will hear a beeping sound, a notification
button will flash along with the
button will illuminate to indicate 'Keylock' is
to restart the cycle.
button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents