Fisher & Paykel WH1260F1 Installation Manual page 29

DESCRIPTION
Wrinkle Free
We recommend to remove the clothes from
● ●
the washer immediately after wash cycle is
complete to reduce wrinkling and creasing
of items and prevent dye run.
Set 'Wrinkle Fee' only if you are going away
● ●
before wash cycle ends.
OFF is default for all wash cycles except for
● ●
'Easy Iron' cycle.
Note: When 'Wrinkle Free' is activated, the washer will tumble the clothes once every
15 minutes for up to 12 hours after the cycle has finished. The main display screen will
show an animation and beep at regular intervals to remind you to remove your load.
To remove the load during this phase, simply touch the
Soak Time
The washer will add the selected sequence,
● ●
which combines periods of tumbling with
soaking to help lift stubborn stains.
'Soak' is not available on the 'Wool', 'Quick'
● ●
and 'Drum Clean' cycles.
'Soak' is not available for ActiveIntelligence™
● ●
cycles.
Eco
Saves water and energy. Reduces wash
● ●
temperature slightly and alters wash and
rinse programming.
'Eco' is OPTIMISED by default for
● ●
ActiveIntelligence™ cycles.
'Eco' must be selected before starting
● ●
the cycle.
'Eco' is disabled once a wash cycle starts
● ●
if not preselected.
Rinse+
'Rinse+' is not available if 'Eco' is ON.
● ●
Use Rinse+ if you have a particularly dirty
● ●
load, or you have sensitive skin and wish to
give your clothes an extra rinse.
Your load will undergo an extra rinse to get
● ●
rid of any residual detergent or soil in the items.
'Rinse+' is always cold.
● ●
'Rinse+' is not available for ActiveIntelligence™
● ●
cycles.
CUSTOMISING WASH CYCLE
OPTIONS
ON
OFF (Default,
except 'Easy Iron')
button.
OFF (Default)
30 mins
1 hour
2 hours
ON
OFF (Default)
OPTIMISED (For
ActiveIntelligence™
only)
ON
OFF (Default)
Options
Wrinkle
Free
OFF
Options
Soak
30 MINS
Options
Eco
OPTIMISED
Options
Rinse+
OFF
27