Fisher & Paykel WH1260F1 Installation Instructions Manual

Installation Instructions
Accessories
Check if you received the following accessories with your Fisher & Paykel washer. You will find them inside the drum or
attached to the packaging.
• 2 x Inlet hose(s)
• 1 x Inlet valve cap
• 1 x Drain hose guide
• 1 x Installation instructions and User guide
• 1 x Spanner
• 1 x Installation leaflet (attached to the top of the washer)
Unpacking
To ensure the best performance from your new washer please follow the instructions below.
Removing the Packaging
1. Remove the outer packaging (including the expanded polystyrene packer and plastic wrapping). All packaging
must be removed prior to use. Ensure these materials are kept out of reach of children.
The transit bolts MUST be removed in order to use the power cord.
2. Tilt the washer backwards and 'walk' it off the base one foot at a time. Not doing so may cause damage to your
floor and washer.
https://producthelp.fisherpaykel.com/nz/Wash/Front_Loaders/FabricSmart/WH1260F1/User_Guide_WH1260F1/03_Installatio...
Updated: Thu, 20 Feb 2020 12:39:38 GMT
Powered by
1