Transmitting Data - wtw pHotoFlex pH Operating Manual

Operation
68

4.8.4 Transmitting data

The following table shows which data are transmitted to the interface in
which way:
Data
Current
measured value
Stored measured
values
Calibration record
(pH electrode)
With the <PRT> key you output the data that is being shown on the dis-
play to the interface (displayed measured values, stored measurement
datsets, calibration record).
Operation / description
 Press <PRT>.
 Simultaneously with every manual storage
process.
 Display stored dataset and press <PRT>.
 All datasets according to the filter criteria via
the RS232 download function
(see section 4.7.2).
 Calibration record of a pH electrode with
<PRT> (after calling up from the storage or at
the end of a calibration).
 Calibration record of a pH electrode at the
end of a calibration procedure is transmitted
automatically.
®
pHotoFlex pH
ba75975e05 10/2017