Table of Contents
Advertisement
Operation
Setting the date, time
and date format
26
After a fall of the supply voltage (empty batteries or rechargeable bat-
tery), the date and time are reset to 01.01.2003, 00:00 hours.
The data format can be switched from the display of day, month, year
(dd.mm.yy) to the display of month, day, year (mm/dd/yy or mm.dd.yy).
1
In the measured value display:
Open the Configuration menu with <MENU>.
The instrument is in the configuration mode.
2
Select and confirm the System / Continue ... / Date/time menu
with <> <> and <START/ENTER>.
Date/time
:
Time
:
Date
:
Date format
3
Select and confirm the Time menu with <> <> and
<START/ENTER>.
A display for the entry of numerals with the number keys opens
up.
Time
14:53:40
4
Enter the time using the number keys.
The digit to be changed is displayed underlined.
In the case of wrong entries, you can cancel the procedure with
<ESC>. After canceling with <ESC>, it is possible to enter all digits
once again. The new digits are only taken over by confirming with
<START/ENTER>.
5
Confirm the setting with <START/ENTER>.
The time is set.
14:53:40
30.10.03
dd.mm.yy
®
pHotoFlex
pH
ba75975e05
10/2017
Advertisement
Table of Contents
