®
pHotoFlex
pH
Switching on
Switching off
Automatic switchoff
ba75975e05
10/2017
4
Operation
4.1
Switching on the meter
Press the <ON/OFF> key.
For 30 seconds, Start menu appears with a selection of the measuring
modes. The measuring mode last selected is highlighted.
The status line indicates the meter designation and the version number
of the software.
Start
Photometry
pH & ORP
i pHotoFlex V 0.24
After a few seconds, the meter automatically switches to the measuring
mode and measured parameter used last.
The measured value display appears (here, e.g. measuring mode Pho-
tometry).
Photometry \ Concentration
i Select program
with <PROG>
01.02.05 15:12
With <M> (long pressure) change the measuring mode.
With <M> (short pressure) toggle between the different measured pa-
rameters in the selected measuring mode.
Press the <ON/OFF> key.
The meter has an automatic switchoff function in order to save the bat-
teries or rechargeable battery (see section 4.4). The automatic swi-
tchoff switches the meter off if no key is pressed for an adjustable
period.
The automatic switchoff is not active
if the power is supplied by the power pack (optional),
if the power is supplied by the LabStation (optional),
if the Timer or Analysis timer function is on.
Operation
19