Configuring The Rs232 Interface; Selecting The Output Format Of Datasets - wtw pHotoFlex pH Operating Manual

Operation
Socket assignment
Output format, ASCII
66
3
1 RTS
2 RxD
2
4
6
3 TxD
5 1
4 DTR
5 SG
6 CTS
RS 232
REC

4.8.2 Configuring the RS232 interface

For an error-free data transmission, the RS232 interface should be set
to the same transmission speed (Baud rate) on the pHotoFlex
PC/printer.
You can set the following values for the baud rate on the
®
pHotoFlex pH : 1200, 2400, 4800, 9600, 19200.
The baud rate is selected in the menu, Configuration / System / Inter-
face / Baud rate.

4.8.3 Selecting the output format of datasets

For downloading data to the interface you can select the output format.
It is selected in the menu, Configuration / System / Interface / Output
format.
The ASCII output format delivers formatted datasets.
The CSV output format delivers datasets separated by ";".
pHotoFlex Ser. no. 12345678
31.10.04 09:56:20
ID: 1
10.01 (pH) AR
25 °C
________________________________________
pHotoFlex Ser. no. 12345678
31.10.04 15:48:08
ID 1 / PROG 2
1.1 mg/l Pb [BV][9 + 1]
________________________________________
etc...
®
pHotoFlex pH
®
pH and
ba75975e05 10/2017