wtw pHotoFlex pH Operating Manual page 67

®
pHotoFlex pH
Output format, CSV
Data
1 No.
2 Date
3 Time
4 ID
5 Program number
6 Citation form
7 AR/
BV
8 Dilution
9 Measured value
10 Unit of 9
11 Measured value
status of 9
12 Secondary mea-
sured value
or
Standard adjustment
13 Unit of 12
14 Measured value sta-
tus of 12
ba75975e05 10/2017
1 2 3
0;01.12.11;14:18:07;1;81;O2;[BV];[2 + 1];166;mg/l;VALID;;;
14;03.12.11;07:41:51;3;;;;;24.8;%;VALID;557;nm;VALID
Description
Current number of the storage location (or "0" during output from mea-
sured value display)
Date of storing
Time of storing
adjusted ID
Only for the measured parameter, Concentration
Only for the measured parameter, Concentration
 Measuring mode, pH & ORP: AutoRead
 Measured parameter, Concentration: Blank value
Only for the measured parameter, Concentration
 Measured value or
 Upper/lower measuring range limit
(only with measured value status, OFL/UFL)
 Unit of the measured value or
 Designation of dimensionless measured values, e.g. <pH>
 VALID: Measured value valid
 INVALID: Measured value invalid
 UFL: Measured value below the lower measuring range limit
 OFL: Measured value above the upper measuring range limit
 Measuring mode, pH & ORP: Temperature
 Measured parameter, Absorbance / % Transmission: Wavelength
 for the measured parameter, Concentration: Status standard adjust-
ment [Cal]
 Measuring mode, pH & ORP: °C / °F
 Measured parameter, Absorbance / % Transmission: nm
VALID, INVALID, UFL, OFL (see point 11)
4 5 6 7 8
Operation
11
9 10
12 13 14
67