Display; Interface - wtw pHotoFlex pH Operating Manual

®
pHotoFlex pH
Settings
Settings
ba75975e05 10/2017

4.4.2 Display

In the Configuration / System / Display menu, you set the display fea-
tures:
 Switching on/off the display illumination (Illumination)
 Display contrast (Contrast)
The settings can be found in the Configuration / System / Display menu.
To switch to the Configuration menu, press the <MENU> key.
Menu item
Illumination
Contrast
Brightness

4.4.3 Interface

In the Interface menu, you set the features of the interface:
 Transmission speed (Baud rate)
 Output format (Output format)
The settings can be found in the Configuration / System / Interface
menu.
To switch to the Configuration menu, press the <MENU> key.
Menu item
Baud rate
Output format
Setting Description
Auto off The display illumination is
automatically switched off if
no key has been pressed
for 30 seconds.
On Switches the display illumi-
nation on or off permanent-
Off
ly (see section 4.5.9)
0 ... 100 % Changes the display con-
trast
0 ... 100 % Changes the display bright-
ness
Setting Description
1200, 2400, Baud rate of the data
4800, 9600, interface
19200
ASCII Output format for data
transmission
CSV
For details, see section 4.8
Operation
33