Table of Contents
Advertisement
Operation
70
4.9.2 Resetting the photometry settings
With the Photometry / Reset function, all photometry settings are reset.
Setting
PROG
Cell size
Measured parameter
Wavelength
Blank values
4.9.3 Resetting the pH settings
The calibration data are reset to the default settings together with the
measuring parameters. Recalibrate after performing a reset.
The following settings for pH measurements are reset to the default
settings with the Reset function:
Setting
Cal. type
Calibration interval
Measured parameter
Asymmetry (Asy)
Slope (Slp.)
Temperature, manual
Temperature
Default settings
0
16 mm
Concentration
436 nm
all erased
Default settings
TEC
7 d
pH & ORP
0 mV
-59.16 mV/pH
25 °C
°C
ba75975e05
®
pHotoFlex
pH
10/2017
Advertisement
Table of Contents
