Components And Controls - Craftex CX series User Manual

Components and Controls:

A. Main On/Off Switch: Turns motor on when
in the up position and turns motor off when
in the down position.
B. Main Switch Safety Key: Disables the switch
when yellow key is removed rendering the
machine disabled.
C. Infeed Table: Supports the material before
it passes over the cutterhead. The depth of
cut is determined by the height of the
infeed table.
8
D. Fence: Supports material laterally as it
passes over the cutterhead. The angle of
the fence determines angle of cut when
edge or bevel joining.
E. Infeed Table Height Adjustment: Allows you
to adjust the height of the infeed table, which
will determine the depth of cut.
F. Outfeed Table: Supports the material after
it passes over the cutterhead. For safest opera tion
and best results the outfeed table should
be set even with the highest point or top dead
centre of cutterhead inserts.