Industrial 2 Of 5 - Microscan MS-1 User Manual

Industrial 2 of 5

Status (Industrial 2 of 5)
Usage: Used primarily in warehouse sortation, photo finishing, and the sequential
numbering of airline tickets.
Definition: Microscan recommends that Industrial 2 of 5 always be used with fixed
symbol length settings in any application. Symbol Length # 1 and Symbol
Length # 2 can both be set to 0 to allow the MS-1 to decode Industrial 2 of
5 symbols of varying lengths.
Serial Cmd: <K488,status,check character status,check character output status,format,
symbol length #1,symbol length #2>
Default: Disabled
Options: 0 = Disabled
Check Character Status (Industrial 2 of 5)
Definition: When this field is enabled, a check character is added.
Serial Cmd: <K488,status,check character
symbol length #1,symbol length #2>
Default: Disabled
Options: 0 = Disabled
Check Character Output Status (Industrial 2 of 5)
Definition: When this field is enabled, the check character will be output with symbol
data. When disabled, the check character will not be output with symbol
data.
Serial Cmd: <K488,status,check character
symbol length #1,symbol length #2>
Default: Disabled
Options: 0 = Disabled
Format (Industrial 2 of 5)
DefinitionL Defines the number of start and stop check characters.
Serial Cmd: <K488,status,check character status,check character output status,format,
symbol length #1,symbol length #2>
Default 3 start / 3 stop
Options: 0 = 3 start / 3 stop
MS-1 Scan Engine User Manual
1 = Enabled
status,check character output status,format,
1 = Enabled
status,check character output
1 = Enabled
1 = 2 start / 2 stop
Symbologies
status,format,
7-15