Table of Contents
Advertisement
Firmware
Firmware Update
Firmware Update is used to download application code to the reader. Application code
versions are specific to your reader. Consult with your sales representative before downloading
application code. If needed, an application code will be sent to you.
To download application code:
1. Be sure that the reader is connected to the host computer.
2. Apply power to the reader.
3. In the Firmware Update dropdown menu, select App Code and then click the Start
button. This will open a dialog that allows you to browse for the application code file.
4. Navigate to where the application code file is located on your host computer and
select the file.
5. Allow approximately a minute for firmware to download.
6. Verify that application code has been updated.
Caution: Do not interrupt power or disconnect the host cable while download is in progress.
MS-1 Scan Engine User Manual
Utilities
9-5
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MS-1 and is the answer not in the manual?
Questions and answers