Microscan MS-1 User Manual page 132

Glossary of Terms
PLC — See Programmable Logic Controller.
Port — Logical circuit for data entry and exit. (One or more ports may be included within a
single connector.)
Programmable Logic Controller (PLC) — An electronic device used in industrial automation
environments such as factory assembly lines and automotive manufacturing facilities.
Protocol — The rules for communication between devices, providing a means to control
the orderly flow of information between linked devices.
Random Access Memory (RAM) — A data storage system used in computers, composed
of integrated circuits that allow access to stored data in any sequence without movement
of physical parts.
Read Cycle — A programmed period of time or condition during which a reader will accept
symbol input.
Read-Only Memory (ROM) — A data storage medium used in computers and other
electronics, primarily used to distribute firmware.
Skew — Rotation of a linear or 2D symbol around an axis parallel to the symbol height on
the substrate. See the illustration under the definition of Pitch.
Substrate — The surface upon which a symbol is printed, stamped, or etched.
Symbol Transitions — The transition of bars and spaces on a symbol, used to detect the
presence of a symbol on an object.
Symbology — A symbol type, such as Code 39 or Code 128, with special rules to define
the widths and positions of bars and spaces to represent specific numeric or alphanumeric
information.
Tilt — Rotation of a linear or 2D symbol around an axis perpendicular to the substrate.
See the illustration under the definition of Pitch.
Trigger — A signal, transition, or character string that initiates a read cycle.
Very Large-Scale Integration (VLSI) — The creation of integrated circuits by combining
thousands of transistor-based circuits on a single chip.
VLSI — See Very Large-Scale Integration.
A-16
MS-1 Scan Engine User Manual