Send/Receive Options - Microscan MS-1 User Manual

Send/Receive Options

Send/Receive Options
To access Receive, Save, and Default options, click the Send/Recv button. You can also
access these options by right-clicking in any of the configuration views.
Receiving
From the Send/Recv menu, select Receive Reader Settings.
Caution: Do not select this option if you do not want to upload the MS-1's settings. For
example, if your ESP file has a number of custom settings that you want to maintain and
download into the MS-1, these settings would be lost by choosing Yes.
This is useful if you want to receive (upload) the MS-1's settings and save them as a file
for future use. For example, if your MS-1 has settings that you do not want to change,
choosing Yes would allow you to load those settings to ESP and save them in an ESP file
for later retrieval.
Receiving the MS-1's settings will also assure that you will not be subsequently saving any
unwanted changes that you or someone else has made previously in ESP.
Saving
Send, No Save (<A>)
Saves ESP settings to current memory.
Send and Save (<Z>)
Activates all changes in current memory and saves to the MS-1 for power-on.
Send and Save, Including Factory (<Zp>)
Activates all changes in current memory, saves to the MS-1 for power-on, and saves the
Communications Mode
Important: Enable Send and Save as Factory Settings
Preferences for this command to function.
4-16
setting.
must be selected in General
MS-1 Scan Engine User Manual