Configuration - Microscan MS-1 User Manual

Configuration

The MS-1 Scan Engine can be configured using ESP (the preferred method), or serial K
commands. Refer to the following chapters in this manual for specific information about
configuring the MS-1:
Quick Start helps you get the MS-1 Scan Engine up and running quickly, to allow you to
get a sense of the MS-1's capabilities and to test symbol decode performance.
Using ESP helps you understand the basic structure and elements of ESP, which is the
configuration software that you will use to set up the MS-1 for operation.
Communications
Read Cycle explains the spatial and timing parameters associated with your application.
Symbologies describes the various symbol types that can be decoded by the MS-1 Scan Engine.
Terminal describes the Terminal window and Macro functions in ESP, which can be used
to configure and test the MS-1.
Utilities explains the operational commands that can also be sent to the MS-1 from Terminal.
MS-1 Scan Engine User Manual
explains how to set up communications between the MS-1 and a host.
Setup and Operation
2-5