Table of Contents
Advertisement
Supermicro C9Z390-PGW Motherboard User's Manual
PCH Voltage
Enter a value for the PCH voltage override. The default is 1010.
PCH 1.8 Voltage
Enter a value for the PCH 1.8 voltage override. The default is 1800.
CPU PLL Voltage
Enter a value for the CPU PLL voltage override. The default is 1200.
CPU_IO Voltage
Enter a value for the CPU IO voltage override. The default is 936.
VCC DMI Voltage
Enter a value for the VCC DMI voltage override. The default is 1000.
Load Line Calibration
This feature controls the load line calibration. The options are Disabled,
Level 1, Level 2, Level 3, Level 4, Level 5, Level 6, Level 7, and Auto.
Uncore
Uncore Voltage Offset
Enter a value for the offset voltage (in mV) that will be applied to the
Uncore domain. The default is 0.
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative
(-). The options are "+" or "-".
Voltage PLL Trim Controls
Core PLL Voltage Offset
Enter a value for the Core PLL voltage offset, with each whole number
equating to 17.5 mV. The range is 0-63. The default is 0.
GT PLL Voltage Offset
Enter a value for the GT PLL voltage offset, with each whole number
equating to 17.5 mV. The range is 0-63. The default is 0.
Ring PLL Voltage Offset
Enter a value for the Ring PLL voltage offset, with each whole number
equating to 17.5 mV. The range is 0-63. The default is 0.
4-18
Advertisement
Table of Contents
