Table of Contents
Advertisement
Chapter 4: AMI BIOS
M.2-M2 L1 Substates
This features configures the L1 substate for M.2-M2. The options are
Disabled, L1.1, and L1.1 & L1.2.
M.2-M1 ASPM
This feature configures the ASPM (Active State Power Management) set-
tings for M.2-M1. The options are Disabled, L0s, L1, L0sL1, and Auto.
M.2-M1 L1 Substates
This features configures the L1 substate for M.2-M1. The options are
Disabled, L1.1, and L1.1 & L1.2.
SATA And RST Configuration
SATA Controller(s)
This feature enables SATA device(s). The options are Disabled or Enabled.
SATA Mode Selection
This feature controls the SATA mode. The options are AHCI or Intel RST
With Intel Optane System Acceleration.
RAID Mode Selection
This feature is only available when "SATA Mode Selection" is set to Intel
RST With Optane System Acceleration. The options are iRST Mode or
Alternate.
PCI-E M.2-M1
PCI-E M.2-M2
These features become configurable if an M.2 device is installed.
Aggressive LPM Support
This feature enables the PCH to aggressively enter link power state. The
options are Disabled or Enabled.
Storage Option ROM/UEFI Driver
This feature controls the execution of UEFI or legacy storage option ROM.
The options are Do not launch, UEFI, and Legacy.
4-37
Advertisement
Table of Contents
