Installing An Active Cpu Heatsink With Fan - Supermicro C9Z390-PGW User Manual

Supermicro C9Z390-PGW Motherboard User's Manual

Installing an Active CPU Heatsink with Fan

1. Apply the proper amount of thermal grease to the heatsink.
2. Place the heatsink on top of the CPU so that the four mount-
ing holes on the heatsink are aligned with those on the retention
mechanism.
3. Tighten the screws in the following order:
Screw #4
4. Once the screws are tightened, plug the power cord into the FAN1
connector.
Note: Screw #1 is not shown in the illustration.
Note: Graphic drawings included in this manual are for reference
only. They might look different from the components installed in
your system.
Screw #2
2-6
Screw #3