Table of Contents
Advertisement
Supermicro C9Z390-PGW Motherboard User's Manual
Onboard LAN2 SUPPORT
Use this feature to enable the onboard LAN2 device. The options are
Disabled or Enabled.
Onboard LAN Option ROM Type
Use this feature to select the type of option ROM installed. The options
are EFI or Legacy.
Onboard LAN1 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer us-
ing a PXE device installed in a LAN port specified. Select Disabled to
prevent system boot using a device installed in a LAN port. The options
are Disabled or PXE.
Onboard LAN2 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer using
a PXE device installed in a LAN port specified. Select Disabled to pre-
vent system boot using a device installed in a LAN port. The options are
Disabled, Legacy, and EFI.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI
(Unified Extensible Firmware Interface) for network stack support. The
options are Disabled or Enabled.
*If this feature is enabled, the two features below are available.
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, Ipv4 PXE boot option will
not be supported. The options are Disabled or Enabled.
Ipv4 HTTP Support
Use this feature to enable IPv4 HTTP boot support. The options are
Disabled or Enabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for
boot support. If this feature is set to Disabled, Ipv6 PXE boot option will
not be supported. The options are Disabled or Enabled.
4-40
Advertisement
Table of Contents
