Supermicro C9Z390-PGW Motherboard User's Manual
Graphics OverClocking
GT OverClocking Frequency
Enter a value for the overclocked RP0 frequency (in multiples of 50 MHz)
in the GT domain. The default is 0.
GT Voltage Mode
This feature controls the voltage mode in the GT domain. The options
are Adaptive or Override.
GT Voltage Override
When "GT Voltage Mode" is set to Override, enter a value for the GT
Voltage Override.
GT Extra Turbo Voltage
Enter a value for the extra turbo voltage (in mV) that will be applied
while GT is operating in turbo mode. The default is 0.
GT Voltage Offset
Enter a value for the offset voltage (in mV) that will be applied to the
GT domain. The default is 0.
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative
(-). The options are "+" or "-".
GT OverClocking Frequency
Enter a value for the overclocked RP0 frequency (in multiples of 50 MHz)
in the GT Unslice domain. The default is 0.
GT Voltage Mode
This feature controls the voltage mode in the GT Unslice domain. The
options are Adaptive or Override.
GT Voltage Override
When "GT Voltage Mode" is set to Override, enter a value for the GT
Voltage Override.
GT Extra Turbo Voltage
Enter a value for the extra turbo voltage (in mV) that will be applied
while GT is operating in turbo mode. The default is 0.
4-16