Table of Contents
Advertisement
Chapter 4: AMI BIOS
GTU Voltage Offset
Enter a value for the offset voltage (in mV) that will be applied to the
GT domain. The default is 0.
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative
(-). The options are "+" or "-".
Voltage Configuration
System Agent Voltage (mV)
Enter a value for the System Agent voltage (in mV). The default is 1056.
Core Voltage Mode
This feature controls the core voltage mode. The options are Adaptive
or Override.
SVID
When "Core Voltage Mode" is set to Override, this feature enables SVID.
The options are Disabled or Enabled.
Core Voltage Override
When "Core Voltage Mode" is set to Override, enter a value for the Core
Voltage Override. The default is 0.
Core Extra Turbo Voltage
Enter a value for the extra turbo voltage (in mV) that will be applied
while IA Core is operating in turbo mode. The default is 0.
Core Voltage Offset
Enter a value for the offset voltage (in mV) that will be applied to the
IA Core domain. The default is 0.
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative
(-). The options are "+" or "-".
Vcc_PLL
Enter a value for the Vcc_PLL override. The default is 1000.
Vcc_ST
Enter a value for the Vcc_ST override. The default is 1000.
4-17
Advertisement
Table of Contents
