Table of Contents
Advertisement
Supermicro C9Z390-PGW Motherboard User's Manual
GNA Device (B0:D8:F0)
This feature enables the SA GNA device. The options are Disabled or
Enabled.
X2APIC Opt Out
This feature enables X2APIC Opt Out. The options are Disabled or
Enabled.
Graphics Configuration
Graphics Turbo IMON Current
Enter a value for the graphics turbo IMON current. The range is 14-31.
The default is 31.
Skip Scanning of External Gfx Card
This feature disables scanning for external graphics cards. When set to
Enabled, the system will not scan for external graphics cards on PEG and
PCH PCIE ports. The options are Disabled or Enabled.
Primary Display
This feature controls which graphics device will be used as the primary
display. The options are Auto, IGFX, PEG, PCI, and SG.
SG Delay After Power Enable
Enter a value for Switchable Graphics Delay after power on. The default
is 300.
SG Delay After Hold Reset
Enter a value for Switchable Graphics Delay after hold reset. The default
is 100.
External Gfx Card Primary Display Display Configuration
Primary PEG
This feature controls the graphics device to be used as the primary
device. The default is Auto, CPU SLOT1 PCI-E 3.0 X8 (IN X16), CPU
SLOT3 PCI-E 3.0 X16, CPU SLOT5 PCI-E 3.0 X8 (IN X16), and CPU
SLOT7 PCI-E 3.0 X16.
4-34
Advertisement
Table of Contents
