Table of Contents
Advertisement
Chapter 4: AMI BIOS
Ipv6 HTTP Support
Use this feature to enable IPv6 HTTP boot support. The options are
Disabled or Enabled.
IPSEC Certificate
This feature enables IPSEC certificate for Ikev. The options are Disabled
or Enabled.
PXE boot wait time
Enter a value for the wait time (in seconds) to press the ESC key to
abort the PXE boot. The default is 0.
Media detect count
Enter a value for the number of times the presence of media will be
checked. The default is 1.
Trusted Computing
Note: This submenu will only appear when a TPM device is installed.
Firmware Version - The TPM device's firmware version
Vendor - The TPM device's vendor
Security Device Support
This feature enables BIOS support for security devices. The options are
Disabled or Enabled.
Active PCR banks - A list of active PCR banks
Available PCR banks - A list of available PCR banks
SHA-1 PCR Bank
This feature enables SHA-1 PCR Bank. The options are Disabled or En-
abled.
SHA256 PCR Bank
This feature enables SHA256 PCR Bank. The options are Disabled or
Enabled.
Pending operation
This feature schedules an operation for the security device. Changing
this setting will reboot the system. The options are None or TPM Clear.
4-41
Advertisement
Table of Contents
