Config Boot Crashkernel - Cisco Aironet Wave 2 Cli Command Reference Manual

config boot crashkernel

config boot crashkernel

To enable or disable kernel crash, use the config boot crashkernel command.
config boot crashkernel {enable | disable}
Syntax Description
enable
disable
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable kernel crash:
cisco-wave2-ap# config boot crashkernel enable
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
34
Enables kernel crash
Disables kernel
crash
Modification
This command was
introduced.
config Commands