Show Rrm Rogue Containment - Cisco Aironet Wave 2 Cli Command Reference Manual

show Commands

show rrm rogue containment

To view rogue containment information on an access point, use the show rrm rogue containment command.
show rrm rogue containment {ignore |info} Dot11Radio radio-interface-number
Syntax Description
ignore
info
Dot11Radio
radio-interface-number
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
The following example shows how to view the rogue containment and statistics for the 802.11
interface numbered 1:
cisco-wave2-ap# show rrm rogue containment info Dot11Radio 1
Rogue Containment Info and Stats for slot 1:
bssid client-addr contain-type channels
NDP DFS Tx Cancelled
Displays list of rogue APs that are configured to be ignored
Displays rogue contaimnent configuration and statistics for an AP
Specifies the Dot11Radio interface keyword.
Slot of the radio interface; valid values are 0 and 1
Modification
This command was
introduced.
Request Status count
Submit 0
Success 0
Timeout 0
Error 0
Tuned 0
Flushed 0
Bad Channel 0
Tail Dropped 0
Cancelled 0
0
Tx Failed 0
Created 0
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7

show rrm rogue containment

127