Show Dot11 Qos - Cisco Aironet Wave 2 Cli Command Reference Manual

show Commands

show dot11 qos

To view the Quality of Service (QoS) parameters for 802.11 network, use the show dot11 qos command.

show dot11 qos

Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
The following example shows how to view the Quality of Service (QoS) parameters for 802.11
network:
cisco-wave2-ap# show dot11 qos
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
show dot11 qos
107