Exec-Timeout - Cisco Aironet Wave 2 Cli Command Reference Manual

exec-timeout

exec-timeout

To set the exec-timeout, use the exec-timeout command.
exec-timeout timeout-value
Syntax Description
timeout-value
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to set the exec-timeout to 20 seconds:
cisco-wave2-ap# exec-timeout 20
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
148
Timeout value; valid values range between 0 to 2147483647
Modification
This command was
introduced.
System Management Commands