Understanding Cli Error Messages - Cisco Aironet Wave 2 Cli Command Reference Manual

Using the Command Line Interface

Understanding CLI Error Messages

This table lists some error messages that you might encounter while using the CLI to configure your AP.
Table 2: Common CLI Error Messages
Error Message
% Ambiguous
command: "show
con"
% Incomplete
command.
% Invalid input
detected at '^'
marker.
Meaning
You did not enter enough
characters for your AP to
recognize the command.
You did not enter all the
keywords or values required by
this command.
You entered the command
incorrectly. The caret (^) marks
the point of the error.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
Understanding CLI Error Messages
How to Get Help
Enter the command again followed by a question
mark (?) with a space between the command and
the question mark.
The possible keywords that you can enter with the
command appear.
Enter the command again followed by a question
mark (?) with a space between the command and
the question mark.
The possible keywords that you can enter with the
command appear.
Enter a question mark (?) to display all the
commands that are available in this command mode.
The possible keywords that you can enter with the
command appear.
5